166
Safety
Jumpy_en_Chap05_securite_ed01-2016
Seat belts
Front seat belts
Fastening
Unfastening
F Press the red button on the buckle.
F
Guide the seat belt as it reels in.
The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side impact.
Depending on the severity of the impact, the
pretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, so
improving their protection.
Height adjustment
The upper part of the diagonal strap
should lie across the shoulder.
F To lower the attachment point, while
moving control A downwards, slide the
assembly down to the desired position.
F
To raise the attachment point, slide the
assembly up to the desired position.
F Pull the strap, then insert the tongue in the
buckle.
F Check that the seat belt is fastened
correctly by pulling the strap.
To Next Page
Loading...
