123
3
Ease of use and comfort
Jumpy_en_Chap03_ergonomie-et-confort_ed01-2016
Load retainer
On the floor, behind the front seats, a
horizontal partition protects the driver and front
passengers against the risk of load movement.
Panel or glazed partitions separate the loading
area from the cab.
High load retaining
net
Seating area
ttings
Depending on the vehicle's equipment, the
various fittings below are located in the seating
area.
This allows the use of the entire load space, up
to the roof:
- behind the front seats in row 1, when the
rear seats (and bench seats) in rows 2
and 3 are folded or removed.
-
behind the rear seats and bench seats
in row 2, when the rear seats (and bench
seats) in row 3 are folded or removed.
Upper xings
Lower xings
(behind row 1)
If your vehicle has fixed one-piece bench seats
or seats and bench seats:
F Unclip the anchorage cover in the roof on
each side.
F
On each side in row 2, insert the fixings in
the floor anchorages (as shown above).
To Next Page
Loading...
