210
Driving
Jumpy_en_Chap06_conduite_ed01-2016
When you move the gear selector or press
the
M button, the corresponding symbol
appears in the instrument panel.
P. Park
R.
Reverse
N.
Neutral
D.
Drive (automatic operation)
M.
Manual operation
1 to 6.
Gear engaged
-
Invalid value
Displays in the instrument panel
F With your foot on the brake,
select position P.
When the engine is running at idle,
with the brakes released, if position R,
D or M is selected, the vehicle moves
even without the accelerator being
pressed.
Never leave children in the vehicle
without supervision.
As a safety measure, never leave
the vehicle without taking your key or
remote control with you, even for a
short time.
When carrying out maintenance with
the engine running, apply the parking
brake and select position P.
If you have to move off on a steep slope
with a loaded vehicle, press the brake
pedal, select position D, then release
the parking brake.
F Start the engine.
If the conditions are not met, there is an audible
signal, accompanied by a message in the
instrument panel screen.
F Release the parking brake.
F
Select position R, N or D.
F
Gradually release the brake pedal.
The vehicle moves off.
F If the message "Foot on brake"
is displayed in the instrument
panel, press the brake pedal
firmly.
Moving off
If P is displayed in the instrument panel
but the selector is in another position,
place the selector in position P to allow
the engine to be started.
If position N is engaged inadvertently
while driving, allow the engine to
return to idle then engage position D to
accelerate.
To Next Page
Loading...
