CITROEN Jumpy 2020 - Page 217

215
6
Driving
Jumpy_en_Chap06_conduite_ed01-2016
Automatic operation
F After starting the engine, select position A
for automatic gear changes
The gearbox operates in auto-active mode,
without any action on the part of the driver. It
continuously selects the most suitable gear for:
-
the style of driving,
-
the profile of the road.
AUTO and the gear engaged are
displayed in the instrument panel.
For optimum acceleration, for
example when overtaking another
vehicle, press the accelerator pedal
firmly past the point of resistance.
Display in the instrument panel
When you move the gear selector, the symbol
corresponding to its position is displayed in the
instrument panel.
Moving off
If the Foot on brake warning
lamp comes on the instrument
panel, accompanied by an
audible signal and a message
"Foot on brake", press the brake pedal
firmly.
R.
Reverse
N.
Neutral
AUTO or A.
Automatic operation.
M.
Manual operation
1 to 6.
Gear engaged
-
Invalid value
If the engine does not start:
If N flashes in the instrument panel,
accompanied by an audible signal
and a message, move the selector to
position A then to position N.
F Select automatic operation (position A),
manual operation (position M), or reverse
(position R).
F
Release the parking brake.
F Progressively take your foot off the brake
pedal; the vehicle then moves off.
N appears in the instrument panel
screen.
F
Select position N.
F
Press the brake pedal down fully.
F
Start the engine.