EasyManua.ls Logo

CITROEN Jumpy 2020 - Page 310

CITROEN Jumpy 2020
595 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
308
In the event of a breakdown
Jumpy_en_Chap08_En-cas-de-panne_ed01-2016
Dipped beam headlamps
(xenon headlamps)
Type E, D8S 25W
F
Press the upper clip on the cover then tip it
rearwards to remove it.
F Turn the bulb holder a quarter turn
anti-clockwise.
F Change the failed bulb.
To refit, carry out these operations in reverse
order.
Replacement of D8S xenon bulbs must
be done by a CITROËN dealer or a
qualified workshop as there is a risk of
electrocution.
It is recommended that both D8S bulbs
be replaced at the same time, in the
event of the failure of one of them.
Main beam headlamps
(xenon headlamps)
Type C, H1-55W
When refitting the connector and bulb
in the lamp, push the assembly into its
housing until it clicks into place.
Faster flashing of a direction indicator
warning lamp (left or right) indicates a
failed bulb on that side.
Direction indicators
(xenon headlamps)
Type B, PY21W-21W (amber)
F
Press the upper clip on the cover then tip it
rearwards to remove it.
F Press the lower clip on the electrical
connector and remove the assembly of
connector and bulb.
F
Pull the bulb out and change it.
To refit, carry out these operations in reverse
order.

Table of Contents

Related product manuals