Clarion NX501E User Manual (English)

Other manuals for Clarion NX501E

Owners Manual And Installation Manual154 pages

Questions and Answers:

J
Justin BakerAug 25, 2025
Why cannot pair the Bluetooth enable device with the Clarion NX501E?
- G
  George RogersAug 25, 2025
  If you cannot pair a Bluetooth enabled device with your Clarion Car Receiver, the device may not support the profiles required for the system, so use another device to connect. Also, the Bluetooth function of the device might not be enabled, so refer to the user manual of the device for how to enable the function.
J
John HolderAug 31, 2025
Why is the Clarion NX501E Car Receiver remote control unit not working?
- J
  Joshua HolmesAug 31, 2025
  If the remote control unit for your Clarion Car Receiver isn't working, it could be due to direct sunlight falling on the light-receptive part of the unit. Also, the battery of the remote control unit may be dead or missing. Check the battery of the remote control unit.
M
mitchellbutlerSep 1, 2025
What to do if the Clarion NX501E Car Receiver USB device cannot be inserted?
- K
  Kevin GilbertSep 1, 2025
  If your Clarion Car Receiver won't allow you to insert a USB device, it might be because the USB device has been inserted in the wrong direction. Reversing the connection direction of the USB device, try it again. Also, the USB connector might be broken, so replace with a new USB device.
A
Alexandra HollandSep 1, 2025
Why is Clarion NX501E Car Receiver display dark?
- C
  carolinedoyleSep 1, 2025
  If the display on your Clarion Car Receiver is dark, the brightness control might be too low. Adjust the brightness properly. The operating condition might not be good, so set to an appropriate temperature (25 or so) and check it again. The headlight of the vehicle might be lit (The display is made dark at night to prevent the glare. When the headlight of the vehicle is lit in the daytime, the display gets dark).
E
Edward ArnoldSep 2, 2025
Why is there no sound heard and no file display on file list on Clarion NX501E Car Receiver?
- L
  lindseycamachoSep 2, 2025
  If there is no sound and no file display on the file list of your Clarion Car Receiver, it could be because no MP3/WMA file is stored in the USB device. Store these files properly in the USB device.
R
Robert LevineSep 3, 2025
Why is the image disturbed when the VTR is connected to Clarion NX501E Car Receiver?
- B
  Billy RoseSep 3, 2025
  If the image is disturbed when the VTR is connected to your Clarion Car Receiver, the NTSC/PAL setting might be improper. Set the AUTO/PAL/NTSC properly according to the VTR.
D
Denise Torres MDSep 4, 2025
Why video images are not displayed on Clarion Car Receiver?
- J
  Johnathan GonzalezSep 4, 2025
  The video images may not be displayed on your Clarion Car Receiver because the parking brake is not engaged. Check that the parking brake is engaged.
H
Hector DavidSep 4, 2025
Why is there no power on my Clarion NX501E Car Receiver?
- J
  Jason ThompsonSep 4, 2025
  If your Clarion Car Receiver isn't powering on and no sound is produced, it could be due to a blown fuse. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Another cause might be incorrect wiring, in which case you should consult your installation center.
C
Cindy WalkerSep 5, 2025
What to do if Clarion NX501E buttons don't work and the display is inaccurate?
- J
  jwilliamsSep 5, 2025
  If the buttons on your Clarion Car Receiver aren't responding and the display is inaccurate, the microprocessor may have malfunctioned. To fix this, press the reset button with a thin rod. Note that pressing the reset button will turn off the power and clear stored radio frequencies and titles.

Clarion NX501E Specifications

General

MP3 playback	Yes
Audio formats supported	MP3, WMA
Supported radio bands	AM, FM
Product color	Black
Audio output channels	4.0 channels
Maximum power per channel	50 W
Display type	LCD
Display diagonal	6.2 \
Bluetooth profiles	A2DP, AVRCP, DUN, HFP, HSP, OPP, PBAP
I/O ports	1x USB 2x A/V In