Clarion NX502E - Pty Search

English
32
NX502E
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Touch the [
] button on the operation
bar.
2. When a desired station is tuned in, press
the [ ] button to continue receiving that
station.
Auto store
Only stations with sufcient signal strength
will be detected and stored in the memory.
To start automatic station search, touch
following buttons on the operation bar in
sequence: [ ] -> [ ] -> [AutoStore] ->
[OK] .
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 3 bands, such as DAB1,
DAB2andDAB3.
Manual store
1. Touch the [ ] button to show list menu.
2. Touch the [ ] button to enter store preset
service menu.
3. Select a position to store current service.
4. Touch [ ] to exit.
Delete stored services
1. Touch the [ ] button to show list menu.
2 Touch [ ] to enter the delete menu.
3. Select services and touch [OK] to delete.
Recall the stored services
1. Touch the [ ] button to show list menu.
2. Touch to select a preset service.
PTY Search
Touch [ ] button on the operation bar, and
then touch [PTYSelect] to show PTY type.
Drag up/down to scroll, and touch to select.
Touch [Seek] to seek a channel within the
selected category.
L-BAND ON/OFF
To turn on L-BAND function, touch following
buttons on the operation bar in sequence:
[ ] -> [ ] -> [L Band] -> [OK] .
Service Link
To select Service Link mode, touch [ ]
button on the operation bar, then touch
[ServiceLink] to choose “DAB-DAB”,
“DAB-RDS” or “Off”.