Clarion NX502E - 3.8 Watching the simulation of the route

68 NX502E English
3.8 Watching the simulation of the route
You can run a simulated navigation that demonstrates the active route. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation
Menu.
2. In the Navigation Menu, tap
.
3. Tap
.
4. Scroll down the list and tap
. The simulation starts from the starting
point of the route, and using a realistic speed, it leads you through the whole
recommended route.
1. (optional) You have the following controls during the simulation (the control buttons
disappear after a few seconds but you can open them again if you tap the map):
•
: Jump to the next route event (manoeuvre).
•
: Pause the simulation.