Section 6. Planned Maintenance
6.15
Wheels and Tires
Check the condition of the drive and steer wheels and tires. Remove
objects that are embedded in the tire. Inspect the tires for excessive
wear and breaks or "chunking out" and bond failure between the tire
and the rim.
Functional Tests
Functional Tests
Now, check that all controls and systems are functioning correctly. Test
horn, lights, and all other safety equipment and accessories. Be sure
they are properly mounted and working correctly.
Check all wheel lug bolts to be sure
none are loose or missing.
Have missing bolts replaced and
loose bolts tightened to the correct
torque before operating truck.
Press the horn button to check horn
function. If the horn or any other part
does not operate, report the failure,
and have it repaired before the truck
is put into operation (key switch must
be ON to operate the horn).
718058
To Next Page
Loading...
