Clarke RA40 - Machine Maintenance Procedures; Scheduled Maintenance Table

ENGLISH INSTRUCTIONS FOR USE
18 RA40 - 9100000394
01/2015
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be dened by the person in charge of the maintenance.
WARNING!
The procedures must be performed with the machine off and the battery disconnected.
Moreover, read carefully the instructions in the Safety chapter before performing any maintenance procedure.
All scheduled or extraordinary maintenance procedures must be performed by qualied personnel, or by an authorised Service
Center.
CAUTION!
When the Service icon
appears on the display (48), contact an authorised Clarke Service Centre for
scheduled maintenance.
This Manual describes only the simplest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted
at any Service Center.
SCHEDULED MAINTENANCE TABLE
Procedure
Daily, after using
the machine
Weekly
Every six
months
Yearly
Battery Charging
Squeegee Cleaning
Brush/pad cleaning
Recovery tank and debris tray cleaning, and cover gasket check
Detergent Mixing System cleaning and draining (optional)
Squeegee blade check
Solution Filter Cleaning
Battery (WET) uid level check
Squeegee blade replacement
Electromagnetic brake efciency check (1)
Drive and brush motor vent check and cleaning (1)
Brush/pad-holder motor carbon brush check or replacement (1)
Drive system motor carbon brush check or replacement (1)
(1) This maintenance procedure must be performed by an authorised Clarke Service Center.
revised 07/2017
9100000394(D)07-2017.indb 18 21/06/2017 11:54:56