Clawgear Mission Sensor - 5.1 Daily Alarm Mode - Setting the Alarm; How to Set the Alarm 1 and Alarm 2

How to Set the Alarm 1 and Alarm 2
• To select the setting display, hold the [M] button for
about 2 seconds in the Alarm 1 (2) Display, then the
digits have been selected will flashing.
• In the setting display, press the [M] button to change the
selection between minute and hour.
• When the digits are flashing (selected), press the [S/S]
or [L/R] button to increase / decrease the number. (Hold
down the button to change the number at a higher
speed).
• When the setting is completed, press and hold the [M]
button to exit the setting display.
5.1 Daily Alarm Mode - Setting the Alarm
Daily Alarm 1 Display
Daily Alarm Time Setting Sequence
hold
[M]
Hour
Setting Display
Minute
[S/S] / [L/R]
hold
[M]
[M]
hold
[S/S] / [L/R]
digits have been
selected (flashing)
Increase/Decrease
the number
Increase/Decrease
the number at a
higher speed