Clawgear Mission Sensor - 8.0 Dual Time Mode - Dual Time and Setting the Dual Time; To Set the Dual Time

Dual Time Mode
• The Watch includes a function to show the time of a
second time zone - Dual Time Mode.
• The second digit of the dual time synchronizes with the
Current Time.
To Set the Dual Time
• To select the setting display, hold the [M] button for 2
seconds in the Dual Time Mode and the digits have
been selected will flashing.
• In the setting display, press the [M] button to change the
selection between hour and minute.
• When the digits are flashing (selected), press the [S/S] /
[L/R] button to increase / decrease the number. (Hold
down the button to change the number at a higher
speed).
• When the setting is completed, press and hold the [M]
button to exit the setting display.
8.0 Dual Time Mode - Dual Time and Setting the Dual Time
hold
[M]
Setting Display
MinuteHour
hold
[M]
[M]
[M]
Dual Time Mode
digits have been
selected (flashing)
hold
[S/S] / [L/R]
[S/S] / [L/R]
Increase/Decrease
the number
Increase/Decrease
the number at a
higher speed
Dual Time Setting Sequence