Clawgear Mission Sensor - 4.2 Current Time Mode - Setting the Current Time

How to Set the Current Time
• To select the setting display, press and hold the [M]
button for about 2 seconds in the Current Time Mode.
In setting display, the word "SET" will appear.
• In the setting display, press the [M] button to change the
selection following the adjacent Current Time Setting
Sequence.
• When the second digits are flashing (selected), press
the [S/S] or [L/R] button to reset the digits to "00".
• When the digits are flashing (selected), press the [S/S]
or [L/R] button to increase / decrease the number. (Hold
down the button to change the number at a higher
speed).
• When month-day order setting is selected, press the
[S/S] or [L/R] button to select either month-day or
day-month format. When 12/24 hour format setting is
selected, press the [S/S] button to select either 12 or 24
hour format.
• When the setting is completed, press and hold the [M]
button to exit the setting display.
4.2 Current Time Mode - Setting the Current Time
Current Time Setting Sequence
hold
[M]
digits have been
selected (flashing)
[S/S] / [L/R]
hold
[M]
[M]
Date Format
Chime
ON/OFF
Unit
Celsius/Fahrenheit
Key Tone
ON/OFF
Unit
Meter/feet
12/24
Hour Format
Day
Month
Year
HourMinuteSecond
[M] [M]
[M]
[M] [M]
[M]
[M]
[M]
[M]
[M]
[M]
hold
[S/S] / [L/R]
Unit
mb/hpa/inHg
Current Time Setting Display
Current Time Display
[M]
Increase/Decrease
the number
Increase/Decrease
the number at a
higher speed