Dialing mode (tone or pulse)
When you place a call, the phone generates
numbers by tone or by pulse. By default, your phone
is set to the tone dialing mode.
Should you need to change this setting based on
your telephone service, use Tone for touch-tone
service or use Pulse for rotary dialing.
To select a dialing mode
1. Press beneath Menu on the screen.
2. Press
and scroll down to SetPhone, and
then press
.
3. Press
and scroll up to DialingMode, and
then press
.
4. Press
and scroll to your selection, and
then press
.
5. Press
until you arrive at the home
screen.
Display backlight
The orange backlight on your screen automatically
turns off after 15 seconds of inactivity.
If you prefer the light on continuously, on the back
of the display, move the BACKLIGHT switch into
the ON position.
Screen contrast
You can adjust the screen contrast to optimize
visibility in different environmental conditions. Eight
contrast levels are available.
To adjust the screen contrast
1. Press beneath Menu on the screen.
2. Press
.
Set Display is selected.
3. Press
and scroll down to Set Contrast,
and then press
.
4. Press and scroll to your selection, and
then press .
5. Press
until you arrive at the home
screen.
To Next Page
Loading...
