ClearSounds CSC600 - During a call; Mute the microphone; Put a call on hold

5756
During a call
Mute the microphone
You can mute a call so that the other party cannot
hear any noise or conversation on your end of the
line. You can still hear the other party.
Muting also works when you use a speakerphone
or headset.
1. Press beneath Mute on the screen.
Mute appears on the screen.
2. To unmute the microphone and return to
conversation, press beneath Unmute.
Put a call on hold
1. Press beneath Hold on the screen.
Call on hold appears on the screen.
2. To return to conversation, press
beneath
Unhold.
Free your hands
During a conversation, you can use these features
to free your hands:
• Speakerphone
• Headset
To turn on the speakerphone during a call
1. Press .
2. Place the handset on the base.
appears on the screen.
3. To adjust the volume, along the right side of the
phone, press
.
Note: To switch back from speakerphone to
handset, pick up the handset.
To switch to a headset during a call
1. Connect the headset to the jack on the left
side of the phone base
2. Press
.
3. Place the handset on the base.
4. Place the headset on your head.
All sound comes and goes only through the
headset.
5. To end the call, press
.
Note: While using the headset, you can switch to
the handset by picking up the handset or you can
switch to speakerphone by pressing
.