ClearSounds CSC600 - Flashing Strobe Light; Vibrating Pad (Add-On Purchase)

3938
Adjust call notification
Flashing strobe light
You can enable or disable a bright, ashing strobe
light notication of incoming calls.
To turn on the strobe light
• On the back side of the phone base, move the
switch to .
To turn off the strobe light
• On the back side of the phone base, move the
switch to .
Note: If the add-on vibrating pad is connected to
the base, this setting turns on pad vibration.
Vibrating pad (add-on purchase)
If you purchased the vibrating pad that is compatible
with your ClearSounds CSC600 phone, you can
enable vibration notication of incoming calls.
To turn on vibration notification
1. Place the pad between your mattress and box
spring or beneath a cushion.
2. Connect the pad cable to on the back side of
the phone base.
3. On the back side of the phone base, move the
switch to one of these positions:
•
for vibration notication only
•
for vibration and strobe light notication
To turn off vibration notification
• Toturnoffvibrationandturnonthestrobe
light: On the back side of the phone base, move
the
switch to .
• Toturnoffvibrationandthestrobelight:
a.On the back side of the phone base, move
the
switch to .
b.Disconnect the vibration pad cable from
on the back side of the phone base.