Cleco mPro300GCD-STO - Page 11

Apex Tool Group P2552HW | 2021-04 11
1
EN
NRTL Certification
Electrical specifications
System Data
Weight
Issuing agency TÜV SÜD
North America
Certificate No. U8V 078313 0010 Rev. 00
Tested in accordance with • UL 61010-1:2012/
R:2018-11
• CAN/CSA–C22.2
No.61010-1:2012/
A1:2018-11
International
Certificate No. DE 3 - 31485
Tested in accordance with • IEC 61010-1:2010
• IEC 61010-1:2010/
AMD1:2016
Control signals STO-A and STO-B at [X41] and [X42]
Nominal voltage [VDC] 24 (based on GND_STO)
Voltage range [VDC] 0 … 28.8
Allowed residual ripple [%] 2 (based on nominal voltage;
leaving the voltage range is
not allowed)
Input current [mA] 4 (typical for 24 V)
Switching threshold On
[VDC]
> 17
Switching threshold Off
[VDC]
< 4.5
Switching time On [ms] < 1
Switching time Off [ms] < 1
Feedback contact FB1, FB2 [X41]
Max. voltage [VDC] < 30
Nominal current [A] 0.5
Resistance [Ω] < 1 (switched on)
Residual current [μA] < 2 (switched off)
Auxiliary supply 24 V [X41]
Nominal voltage [VDC] 24
Nominal current [mA] 100 (short circuit proof)
Features Data
System Functions Battery Buffered Real Time Clock,
Buffer Time: 10 Years (at 20 °C)
Display LC Display With Touchscreen,
7" TFT Liquid Crystal Display,
Resolution 480 x 800, Connection To
Panel & Touch Possible
Operating System Linux, Bootable Without Mechanically
Moving Drives, No UPS Required
HMI
(Human Machine
Interface)
Virtual Keyboard for Alphanumeric
Inputs
Model Weight
Ib kg
MPRO300GCD-STOEMEA
MPRO300GCD-STONA
MPRO300GCD-STOAPAC
11,9 26,2
including mounting plate 13 28,7
Features Data