65
Figure 56
Step 1
Select a forward-facing vehicle seating location which
has a vehicle belt which can be used with this car seat.
For seating positions with an inflatable vehicle belt,
install using LATCH or install without the Base.
Step 2
Move the front seat of the vehicle all the way forward.
This will give you more room to install the Base.
Step 3
If the vehicle seat back is adjustable, make sure the seat
back is locked in a more upright position. DO NOT use
this car seat while the vehicle seat back is excessively
reclined, as shown in Figure 56.
To Next Page
Loading...
