66
Step 4
Rotate the Load Leg out into the use position by pulling
the Load Leg out from the Load Leg Storage on the
bottom of the Base, as shown in Figure 57.
IMPORTANT: Clek STRONGLY RECOMMENDS using
the Load Leg. However, if you cannot use the Load Leg,
leave the Load Leg in the Load Leg Storage position and
go to the next step.
Step 5
Position Base on the vehicle seat with the Vehicle Belt
Guides facing the vehicle seat back and the Load Leg
positioned towards the floor, as shown in Figure 58.
Figure 58
Figure 57
To Next Page
Loading...
