Clevo 2700T - Chapter 2: Disassembly; Size Chart for Screws and Hex Nuts

Disassembly
2 - 1
Chapter 2: Disassembly
To make the disassembly process easier each section may have a box in the page margin. Informa-
tion contained in the  boxes informs you what tools will be needed for a given procedure and the
amount of screws involved. A  box lists the components that are important for that particular
procedure. A contains information that may be helpful to you. Examples are shown on the left.
All screw and nuts used in the assembly of the Notebook Computer are assigned a letter. If
you encounter any problems reassembling the machine, refer to this table to make sure you are
using the proper screw or nut.
Size chart for screws and hex nuts:

This box lists the
tools needed and
the amount of
screws used.

This box lists the
names of the
relevant parts.
Information in
thie box will give
possible useful
information.
Note
retteL eziS retteL eziS
A
.mm5x7.1
J
.mm6x5.2
B
.mm2x2
K
.mm8x5.2
C
.mm3x2
L
.mm41x5.2
D
.mm4x2
M
.mm32x5.2
E
.mm5x2
N
.mm5.3x6.2
F
.mm01x2
O
.mm4x3
G
.mm3x5.2
P
wercsknistaeH
H
.mm4x5.2
Q
tunxehffodnatS
I
.mm5x5.2
R
).mm11(dutsxeH