Clevo 2700T User Manual

Service Manual
2 - 8
Remove the CD device assembly
1. Remove screw (I) in figure 2-7.
2. Use a small screwdriver to gently push the CD device assembly out of the case (figure 2-7).
3. Remove the heat sink. ** (refer to page 2-9 for heat sink removal steps)
1 Philips
screwdriver
1 screw

For information
on removing the
CD device from
the assembly go
to Appendix A.
Note
**
When reinstall-
ing the CD de-
vice assembly
you should do so
with the heat
sink removed.
Reinstall the
assembly, fasten
the screw and
then reinstall
the heat sink.
This will ensure
that there are no
interference
problems later
once you restart
your computer.
figure 2-7
I

Clevo 2700T Specifications

General

Brand	Clevo
Model	2700T
Category	Laptop
Language	English