Clevo 2700T - Mainboard (71-22 T00-D03; Remove the FDD Assembly; Remove the CD Device Tray; Remove the Fan

Disassembly
2 - 15
Remove the Fan
1. Unplug the fan cable
from the mainboard.
2. Lift out the fan.
Remove the FDD assembly
1. Remove screw (I).
2. Remove the hex nut (Q).
3. Unplug the FDD cable and lift the FDD as-
sembly off of the mainboard.
Remove the CD device tray
1. Remove screws (I).
2. Remove screw (F)
3. Unplug the CD device cable and slide the tray
slightly to the right and lift it off of the mainboard.
figure 2-17
1
3
4
5
2

For information
on removing the
FDD from the
FDD assembly
go to Appendix
A.
Note
1 Philips screw-
driver
1 Hex socket
wrench
FDD:
1 Stand-off Hex
nut
1 Screw
CD device tray:
3 Screws

1) Fan
2) Fan cable
3) Fan cable
connector
4) FDD assembly
5) CD device tray
Q
I
I
I
F