Clevo 2700T - Page 4

Preface
iii
Remove the CD device assembly..............................................2-8
Remove the heat sink..................................................................2-9
Applying a heat sink pad...........................................................2-9
Remove the CPU ........................................................................ 2-10
Reinstall the CPU...................................................................... 2-11
Separate the notebook base in two..................................... 2-12
Remove the FDD assembly ..................................................... 2-15
Remove the CD device tray .................................................... 2-15
Remove the Fan......................................................................... 2-15
Remove the mainboard and tray
from the bottom case................................................................ 2-16
Remove the mainboard
from the mainboard tray......................................................... 2-17
The LCD Panel ........................................................ 2-18
Remove the LCD panel frame ................................................ 2-18
Remove the LCD panel and bracket
from the LCD panel case * ..................................................... 2-19
Remove the LCD panel from the bracket ........................... 2-21
Remove only the LCD panel
(for 14.1” LCD screens)............................................................. 2-22
Remove the modem module ................................................... 2-24