Clevo P170SM - Removing the SSD

Disassembly
Removing the SSD 2 - 9
2.Disassembly
Removing the SSD
1. Turn off the computer, and remove the battery (page 2 - 5) and hard disk (page 2 - 9).
2. Remove the screws from the shielding plate (Figure 5a
).
3. Remove the SSD shielding plate and remove the screw from the SSD (Figure 5b
).
4. The SSD module will pop-up and you can remove it from the computer (Figure 5c
).
5. Reverse the process to install a new SSD
.
Figure 5
SSD Removal
a. Remove the screws.
b. Remove the shielding
plate and screw.
c. Remove the SSD mod-
ule.
1
6
2
3
6
4

2. SSD Shielding Plate
4. SSD Module
•2 Screws
1
3
2
4
a. b.
4
c.