Clevo P170SM - Removing the Top Cover

Disassembly
Removing the Top Cover 2 - 27
2.Disassembly
Removing the Top Cover
1. Turn off the computer, remove the battery (page 2 - 5), component bay cover (page 2 - 14), and keyboard (page 2
- 16).
2. Disconnect the cable connectors - and carefully lift the corresponding wires at the point from the holder as
indicated by the arrows
- (Figure 23a).
3. Turn the computer over, remove the fan cables & and screws - (Figure 22b).
4. Remove the fan unit off the computer (Figure 22c).
1
3
4
A
C
5
6
7
13
14
5
a.
2
3
1
c.
b.
4
6
B
A
C
7
8
9
10
11
14 14
12
13

14. Fan Unit
•7 Screws
Figure 23
Top Cover Removal
a. Disconnect the cable
connectors and lift the
the wires from its holder.
b. Disconnect the cables
and remove the screws.
c. Remove the fan unit.