Clevo P170SM - Removing the CCD

Disassembly
2 - 26 Removing the CCD
2.Disassembly
Removing the CCD
1. Turn off the computer, remove the battery (page 2 - 5).
2. Remove the rubbers and screws - (Figure 22a).
3. Run your fingers around the inner frame of the LCD panel at the points indicated by the arrows - (Figure
22b
).
4. Carefully Remove the LCD panel off (Figure 22c).
5. Disconnect the cable (Figure 22d).
6. Remove the CCD module off (Figure 22e).
Figure 22
CCD Module
Removal
a. Remove the rubbers and
screws.
b. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrow.
c. Remove the LCD panel.
d. Disconnect the cable.
e. Remove the CCD mod-
ule.
1
6
A
D
7
8
9
5
b.
a.
2
3
1
9
d.
c.
7
4
6
e.
B
A
C
D
8

7. LCD Front Panel
9. CCD Module
• 6 Rubber and
Screws