Clevo P170SM - Removing the Top Cover (cont’d.)

Disassembly
2 - 28 Removing the Top Cover
2.Disassembly
5. Remove screws - (Figure 24d).
6. Lift the top cover at point
(Figure 24e).
7. Carefully separate the top cover from the bottom case in the direction of the arrow at point . The hinge
cover will automatically be released from its holder (Figure 24f).
8. Reverse the process to install the top cover (do not forget to replace all the screws, hinge cover and bottom case).
15
35
36
37
39
38
40
12
13
36
e.
d. f.
37
28
15 16
17 18 19
20
21
22
23
35
26 25 2427
34
33
32
29
30
31
38
40
37
40
39

37. Top Cover
39. Bottom Case
40. Hinge Cover
•21 Screws
Figure 24
Top Cover Removal
(cont’d)
d. Remove the screws.
e. Lift the LCD panel.
f. Separate the top cover
from the bottom case of
the computer.