31
®
www.climacoolcorp.com
Project Name: Contractor Name:
Address: Address:
City/State/Zip: City/State/Zip:
Start-up Date: Phone No.:
Model No.: Model No.:
Serial No.: Serial No. 1:
Chiller No.: Serial No. 2:
Evaporator: /
"Flow devices" shut off chiller below 40% of flow for Evaporator and 25% for Condenser: Yes
► All wiring terminations in module panel, safeties and compressors tightened: Yes No
Yes No
L1 L2 L3 L1/L2 L2/L3 L1/L3
Amperage: L1 L2 L3 Amperage: L1 L2 L3
Sight Glass Oil Level: Sight Glass Oil Level:
Suction Pressure: Suction Pressure:
Suction Temperature: Suction Temperature:
Compressor Superheat: Compressor Superheat:
Discharge Pressure:
Discharge Line Temperature (F): Discharge Line Temperature (F):
Discharge Gas Superheat (F): Discharge Gas Superheat (F):
Liquid Line Temperature: Liquid Line Temperature:
Liquid Subcooling: Liquid Subcooling:
Evaporator Entering Water Temperature: Evaporator Entering Water Temperature:
Evaporator Leaving Water Temperature: Evaporator Leaving Water Temperature:
Condenser Entering Water Temperature: Condenser Entering Water Temperature:
Condenser Leaving Water Temperature: Condenser Leaving Water Temperature:
Evaporator Pressure Differential:
Condenser Pressure Differential: Software Version:
► Verify Safety Setting Limits: ► Verify Safety Setting Limits:
Rep Signature: Print Name:
E-Signature:
For initial MANDATORY water samples, bottles are provided.
Follow instructions on label and mail the same day sample is taken.
Bank Water Pressures Entering / Leaving
Startup and Warranty Registration Form (Water-Cooled UCW/H)
Sign, date and E-mail to: technicalsupport@climacoolcorp.com or
Fax: 405.815.3052 Attn: Technical Support
► Rotation of scroll compressor is correct:
Water Samples Taken (Mark "X")
Doc: WaterCooledStartup UCW/H
SD #0012 Rev. 8.26.14