ClimaCool UCW 30 - Cleaning Arrangement

®
www.climacoolcorp.com
34
Cleaning Arrangement
Figure 25 - City Water Cleaning Arrangement
Notes:
1. 
2. Be sure to open all manual valves before unit is put back into operation.
Pete's Ports
Isolation Ball Valves
(2, 2 ½ or 3")
Service Port (3/4")
Heat Exchanger
Figure 1 - City Water Cleaning Arrangement
Figure 2 - In Place Cleaning Arrangement
Connect to City Water
Refrigerant Circuit
Service Port (3/4")
Refrigerant Circuit
Connect to Drain
Header
Header
To Cooling Tower
From Cooling Tower
Pete's Ports
Isolation Ball Valves
(2, 2 ½ or 3")
Service Port (3/4")
Heat Exchanger
Refrigerant Circuit
Service Port (3/4")
Refrigerant Circuit
Header
Header
To Cooling Tower
From Cooling Tower
Cleaning Tank
Cleaning Pump
Pete's Ports
Isolation Ball Valves
(2, 2 ½ or 3")
Service Port (3/4")
Heat Exchanger
Figure 1 - City Water Cleaning Arrangement
Figure 2 - In Place Cleaning Arrangement
Connect to City Water
Refrigerant Circuit
Service Port (3/4")
Refrigerant Circuit
Connect to Drain
Header
Header
To Cooling Tower
From Cooling Tower
Pete's Ports
Isolation Ball Valves
(2, 2 ½ or 3")
Service Port (3/4")
Heat Exchanger
Refrigerant Circuit
Service Port (3/4")
Refrigerant Circuit
Header
Header
To Cooling Tower
From Cooling Tower
Cleaning Tank
Cleaning Pump
Figure 26 - In Place Cleaning Arrangement