Service and Maintenance
B-40
GLC 353/503/553 MC3
The complete cooling system must then be rinsed with fresh distilled water, re- filling,
circulation with the aid of a pump, draining off as far as possible; if necessary use
compressed air. The new cooling agent can be refilled as described under III. in the
operating instruction manual, paragraph 8: Cooling agent.
Only use
CLOOS cooling agent - Part No. 000 01 01 31
which contains
anti-freeze up to -20
0
C
and also protects against corrosion .
Clean cooling agent prevents erosion of the torch body and other parts of
the cooling water system due to electrolytic effect !
W2 Special instructions
To Next Page
Loading...
Need help?
General
