MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 4 of 127
➔ This manual (or its copy) must always be
kept in the best possible condition (away
from sunlight).
➔ During the work, a copy shall be hold by the
ground operator in a turret case and another
copy by the basket operator inside the
proper documents case.
➔ In case of loss or deterioration, the replace-
ment documentation must be requested to
the manufacturer, specifying the code and
the review number of the manual.
0.4 Legislative references
The machine has been designed, built and tested
according to:
o the harmonized European standard EN280
which provides the presumption of conformity to
Essential Safety Requirements of the Machin-
ery Directive 2006/42/EC being Voluntary Tech-
nical Standard - type C;
o the American standard ANSI/SAIA 92.2.
The stability and overload tests of the machine were
carried out in compliance with what described in
EN280 and ANSI/SAIA A92 suite and they have been
successful.
In addition, the technical safety requirements of the
following international standards have been applied:
To Next Page
Loading...
Need help?
General
