CMC S23 - Six-Monthly Maintenance; Biennial Maintenance

MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 93 of 127
8.6 Six-monthly maintenance (or
every 750 hours)
Operations
by
Replacement of the hydraulic filters
(25 micron).
USER /
CMC
Complete check of the whole ma-
chine and note the results in the ap-
propriate manual section.
USER /
CMC
8.7 Annual Maintenance (or
every 1500 hours)
Operations
by
Replacement of hydraulic oil.
CMC
As regards the replacement of hydraulic oil, it is ad-
visable to follow the indications below:
1. Place the machine in the transport configura-
tion and bring the oil to operating temperature
by performing some manoeuvres before pro-
ceeding with the operations described above.
2. Suck the oil from the tank;
3. Remove the hydraulic filter;
4. Replace the filter;
5. Fill the tank by pouring the oil through a filter
with a degree of filtration equal to 25 microns.
8.8 Biennial maintenance
Operations
by
Complete inspection of the whole
machine and note the results in the
appropriate manual section.
CMC
8.9 Five-yearly maintenance
Operations
by
Complete inspection of the whole
machine and note the results in the
appropriate manual section.
CMC