CMC S23 User Manual

MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 105 of 127
12 Functional tests
During the commissioning of the machine,
we carried out the following functional
tests. We have tested the correct operation
of the safety systems.
Test description
Out-
come
• Block of the manoeuvre in case of
release of the operation lever se-
lected.
OK
• Basket levelling allowed only when
the MEWP aerial part is set in the
rest position (pantograph on its sup-
port and telescopic boom on its sup-
port).
OK
• Manual pump for operations in case
of emergency.
OK
• Outriggers-boom operation inter-
lock.
OK
• Aerial part operations block when
the MEWP is not stabilized
OK
• Block of the return/extension of out-
riggers when the MEWP aerial part
is not set in the rest position.
OK
• Warning light for machine stabilized.
OK
• Warning light for electrical supply of
the MEWP.
OK
• Warning light for aerial part use.
OK
• Emergency buttons in control sta-
tions.
OK
• Block valves on the cylinders.
OK
• Pressure relief valve for the protec-
tion of the entire hydraulic circuit.
OK
• Pressure relief valves for the protec-
tion of the individual parts of the sys-
tem.
OK
• Fuse for the protection of the electri-
cal system.
OK
• Anti-crash system.
OK
• Load limiter device (*optional).
OK
• Emergency electropump (*optional).
OK

CMC S23 Specifications

General

Brand	CMC
Model	S23
Category	Lifting Systems
Language	English