MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 64 of 127
Pay the utmost attention during stabilization:
check that no one is inside the stabilization
area.
➔ Check that the outriggers rest on a non-soft,
solid ground that bears the load indicated on
each stabilizer.
➔ In case of soft ground, use supporting plates.
It is forbidden to place the outriggers on
ground roughness: they could be damaged.
➔ Level the machine in order to let the MEWP op-
erate on a horizontal plane: max frame fall 1° -
max slope which can be assimilated by the
ground 3°.
4.7.4 During the entrance in the basket
It is absolutely forbidden to use the equipment
with loads different from those indicated on
the diagram or for uses which are not allowed;
Do not overload the MEWP;
➔ During the different working operations, the
use of the safety belts is compulsory. Do not
fasten the safety belts to external structures but
only to the supplied grips placed in the basket;
➔ Make sure that the bar lifted to enter the basket,
has returned in its lock position.
4.7.5 During the use of the MEWP
➔ In any dangerous or irregular conditions, stop
the machine by using the emergency button. Be-
fore restarting the machine, check that the dan-
gerous conditions are over;
It is strictly forbidden to level the basket when
the machine is in working position;
Do not operate when the MEWP is in failure;
It is forbidden to use the “platform control
(emergency) position” when there are opera-
tors inside the basket, unless there is emer-
gency or for testing operations before starting
the work (which shall be carried out without
To Next Page
Loading...
Need help?
General
