EasyManua.ls Logo

CMC S23 - Work Safety Rules

CMC S23
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAN.241 Rev.5 ENG - Use and maintenance manual S23 page 66 of 127
It is forbidden to use tools not complying with
the laws in force;
When working at low temperatures, it is neces-
sary to perform some in-vain operation so that
the hydraulic circuit oil reaches the operating)
temperature;
It is forbidden to let people walk or stay within
the MEWP working area;
It is forbidden to stay on the counter frame
floor, during MEWP operations.
Firmly cling to the work platform during lift and
descent;
Controls shall be started by slow and grad-
ual movements:
Do not operate controls swiftly and suddenly
It is forbidden to make the platform swing;
Check the MEWP stability during all the opera-
tions phases;
Do not move the MEWP during the working op-
erations;
Keep enough safety distance from the obsta-
cles: avoid contacts with fixed (buildings, etc.)
and moving (vehicles, cranes, etc.) objects, with
the truck cabin, with the outriggers and with
other structure parts;
It is forbidden to use ladders or tables on the
basket in order to increase the MEWP out-
reach or working height;
Be careful when working in close buildings: due
to the “wind tunnel” effect, sudden blasts could
cause swinging, thus impairing the machine sta-
bility;
It is forbidden to lift “full surface” panels
(signs, advertising panels, boards, etc.):
these could cause the “sail” effect;
It is forbidden to leave the MEWP unattended
when it is in working position;
It is forbidden to exceed the max number of
basket operators allowed;

Related product manuals