EasyManuals Logo

CMi C-BKS 25 4-30 User Manual

CMi C-BKS 25 4-30
Go to English
414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
111
Heed obstacles in the work area.
While you are working, always hold the device fast with both hands!
Hold the device:
with the left hand on the handle
with the right hand on the handle
balanced in a secure position.
Here’s how to saw correctly!
Search the work area and remove objects which are in your way.
When you begin work, check the safety of the device (Check before starting!– p.108).
Starting the motor (Starting the motor– p.109).
Take the device in both hands as instructed (Correct posture– p.110).
Push the throttle through carefully. Always saw with sufficient speed!
Risk of rebound!
Rebounds occur if the upper edge or tip of the saw rail touch wood or other hard objects. The
device is thrown with high energy back and forth, which can cause extremely severe injuries.
Avoid letting the area of the saw rail depicted on the right touch
wood or other hard objects.
In order to reduce the risk of injury in case of a rebound, the device
is equipped with a chain brake which is triggered automatically on
impact and which stops the saw chain immediately.
For safety reasons, the functionality of the chain brake must be
checked each time the device is used (Checking the chain
brake– p.121).
With less strong rebounds, it can happen that the chain brake is not triggered automatically.
For this reason it is important that the device be held fast with both hands.
Only a careful and correct working method can reduce the risk of a rebound reliably!
Basic work technique
DANGER!
Risk of injury!
Always switch the motor off before you put the device down!
DANGER!
Risk of injury!
When working with the device, dangerous rebounds may occur! Severe or even fatal
injuries can be the result!
Before beginning work with the device, the chain brake must be checked to ensure that
it is functioning correctly!
DANGER!
Risk of injury!
This section treats the basic work technique when handling the device. The information
provided here does not replace the many years of training and experience of a profes-
sional.
Avoid any work for which you are not sufficiently qualified! Thoughtless handling of the
device can cause severe or even fatal injuries!
GB
Kettensaege_Benzin_462226.book Seite 111 Mittwoch, 10. Oktober 2012 2:43 14

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CMi C-BKS 25 4-30 and is the answer not in the manual?

CMi C-BKS 25 4-30 Specifications

General IconGeneral
BrandCMi
ModelC-BKS 25 4-30
CategoryChainsaw
LanguageEnglish

Related product manuals