120
Cleaning and maintenance
Cleaning and maintenance overview
Before each use
After each use
Every 10 hours of operation
Cleaning
Clean the device
– Remove coarse dirt.
– Wipe down the device with a slightly damp cloth.
DANGER!
Risk of injury!
Before any maintenance or cleaning work:
– Switch off the motor (►Turning off the motor– p.110).
– Let the device cool down.
– Disconnect the spark plug (►Cleaning/replacing the spark plug– p.122).
DANGER!
In the interest of your own safety!
Only perform the maintenance work described here yourself.
Any other work, especially motor maintenance and repairs must be performed by a
trained professional. Improper work can cause damage to the device and thus also
injuries.
What? How?
Check device for damage. Visual inspection.
Check the chain brake to ensure it is function-
ing correctly.
►Checking the chain brake– p.121.
Tension saw chain. ►Tightening the chain– p.106.
What? How?
Clean the device ►Clean the device– p.120.
Clean oil guide groove of the saw rail. ►Cleaning the oil guide groove of the saw
rail– p.121.
What? How?
Clean the air filter. ►Replacing the air filter– p.122.
Check the spark plug. ►Cleaning/replacing the spark plug–
p.122.
GB
Kettensaege_Benzin_462226.book Seite 120 Mittwoch, 10. Oktober 2012 2:43 14
To Next Page
Loading...
Need help?
General
