EasyManua.ls Logo

CNC-Step S-400 T - Radiation Hazards; Hazards of Chemicals

CNC-Step S-400 T
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 14
Support: +49 (0)2831/91021-50
15.02.2014
2.2.5 Radia ti on haza rds
Magnetic fields
DANGER:
Danger to life by magnetic fields!
Magnetic fields of step motors can cause severe injuries or death, as well as serious
damage to materials.
Persons with pacemakers must keep away from the machine! It can
effectively provoke a dysfunction of the pacemaker.
Persons with metallic implants must not be allowed in the area of the
machine. Implants can heat themselves up or be drawn-in.
Take off all metal objects (Jewellery, watches, pens etc.) before starting
maintenance operation.
No electronica equipment is to be taken into the magnetic source area. These
could get damaged.
No storage media, credit cards etc. are to be taken into the magnetic source
area. Containing data may be deleted.
2.2.6 Haza r ds o f chemi ca ls
Cooling emulsion
WARNING:
Danger of serious damage to health by polluted cooling emulsion!
Polluted cooling emulsion can cause inflammations when coming in contact with
skin.
Cooling emulsion must be checked at regular intervals.
When handling with polluted cooling emulsion protective clothing and
chemical-resistant safety-gloves must be worn.
Avoid direct skin contact. Cleanse skin, especially before breaks and when
finishing work.
Eat and drink in relevant break room only!

Table of Contents

Related product manuals