CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
5 Transport, packag ing and storage
HINT:
As part of the installation and the further use the operator or maintenance personnel
must be entrusted by the operator with the handling of packages. Always observe the
instructions listed below.
5.1 Safety instructions for transport
Suspended loads
WARNING:
Danger to life due to suspended loads!
When lifting operations are carried out loads can swing out and fall off. This may
lead to serious injury or death.
• Never stand under or into the swivel area of a suspended load.
• Loads are only to be moved only under supervision.
• Use only approved lifting gear and lifting gear with sufficient load-bearing
capacity.
• Do not use damaged or frayed lifting equipment such as ropes and straps.
• Lifting equipment such as ropes and straps must not be laid on sharp edges
and corners do not twist or knot.
• When leaving the workplace settle the load.
WARNING:
Risk of injury by falling or tipping packages!
Packages may have an off-centre focus. The wrong kind sling gear attachment can
tilt the packing crate and cause life-threatening injuries.
• Observe the markings and details on the focus on the package.
• Attach the crane hook so that it is directly above the centre of gravity.
• Lift cautiously and observe whether the load tilts.
To Next Page
Loading...
