CNC-Step S-400 T - Measures after Maintenance

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 69
Support: +49 (0)2831/91021-50
15.02.2014
8.5 Measures after maintenance
After completion of maintenance and before turning on the machine, perform the following steps:
1
Check all previously loosened screw connections for tightness.
2
Verify that all previously removed protective devices and covers are reinstalled correctly.
3
Ensure that all tools, materials and other equipment used were removed from the work area.
4
Clean work area and remove any spilled substances such as fluids, processing material or
similar materials.
5
Ensure that all safety devices on the machine function properly.