CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Ins so signed areas only skilled electricians are allowed to work.
Unauthorized people must not enter these signed working areas or open so signed
cupboards.
The start of the machine in production systems is indicated by a flashing light or
acoustic signal. From this moment on all works must be finished.
After signalling, leave danger zone.
Always maintain an adequate distance to all moving parts, risk of hands, hair and
clothing being drawn in.
Hot surfaces, such as hot machine parts, container and materials, may not always be
noticeable. Do not touch without protective gloves!
To Next Page
Loading...
