CNC-Step S-400 T - Symbols on Packaging; Transport

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 45
Support: +49 (0)2831/91021-50
15.02.2014
5.4 Symbols on packaging
The following symbols are shown on the packaging. Always heed the symbols during transport.
Fragile
Identifies packages with fragile or delicate contents.
Treat the package with care, do not drop or bump it.
Do not stack
In the designated packages or goods should not be stacked.
Protect from moisture
Protect packages from moisture and keep dry.
5.5 Transport
Sling points
The machine may only be transported and slinged in the frame.
Transport of pallets with the crane
Transport pieces, which are fastened on a pallet can be transported by a crane under the following
conditions:
• Crane and lifting gear must be designed for the weight of the transported items.
• The operator must be authorised to operate the crane.