CNC-Step S-400 T - Page 66

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 66
Support: +49 (0)2831/91021-50
15.02.2014
Grease Lubrication nipple on the motor bearings
Personnel:
• Qualified personnel
Safety equipment:
• protective clothing
• Safety shoes
• Chemical-resistant gloves
Special tool:
• Grease gun
Grease nipple X-axis (2 pcs.)
Fig. 31: grease nipple X-axis
1
Switch off the machine and secure against re-start.
2
Put Grease Gun onto the grease nipple on the X-axis.
3
Operate Grease Gun once or twice.
4
Remove grease gun.
5
Put Grease Gun onto the grease nipple of the other X-axis
6
Perform working steps 2-4.