CNET CSH-2402S - RMT Menu Summary; Exiting the RMT and Saving Configuration; Figure 3-11 RMT: Selected Switch; Table 3-1 RMT Menu Summary

Smart Ethernet Switch Series User’s Manual
You can only configure ONE switch at a time.
Figure 3-11 RMT: Selected Switch
To configure, select a
switch
or
double-click an entry.
3.5. RMT Menu Summary
The following table lists the menus in the RMT.
Table 3-1 RMT Menu Summary
NETWORK SWITCH STATUS SWITCH
CONFIGURATION
SWITCH INTERNALS
Switch
Selection
Switch
Database
Port Status
MIB Information
Cable Tester
Signal Quality
Global Configuration
Port Configuration
QoS Configuration
VLAN Configuration
Port Mirror Configuration
Security Configuration
Device Management
3.6. Exiting the RMT and Saving Configuration
To close and exit from the RMT, simply click the close button on the upper right corner.
A Confirm screen displays prompting you to save the configuration changes to the switch.
Click Yes to save the changes and close the screen. Click No to discard all changes and
close the screen. Click Cancel to close the Confirm screen without exiting the RMT.
19