Smart Ethernet Switch Series User’s Manual
Chapter 4. Network
4.1. Switch Selection
Display the Switch Selection screen to view the information of all switches. Click Network >
Switch Selection to display the screen.
When you run the RMT, the RMT will automatically search for all the RRCP-enabled switches
on the network and display the information in the Discovered Switches list table.
Select a switch for management from the Selected Switch field. You can only manage one
smart switch at a time.
Figure 4-1 Network: Switch Selection
The following table describes the labels in this screen.
Table 4-1 Network: Switch Selection
LABEL DESCRIPTION
Discovered
Switches
This table displays the information all RRCP-enabled switches found on the
network.
Double-click an entry to manage the switch.
Right-click on an entry to add the switch information to the database.
Name This field displays a descriptive name for the switch. This field displays
Unknown if the switch information is not in the Switch Database screen.
21
To Next Page
Loading...
