Smart Ethernet Switch Series User’s Manual
Table 4-2 Network: Switch Selection: Set
LABEL DESCRIPTION
NOTE: This does NOT change the hardware MAC address on the switch.
Authentication
Key
Accept the default or enter the security key for the RMT to access the switch for
management.
OK Click OK to save the settings in the RMT. You can view the switch information in the
Switch Database screen (see Figure 4-3).
Cancel Click Cancel to discard all changes and close this screen.
4.2. Switch Database
You can view the information of the switch(es) you added to the database in the Switch
Database screen. Click Network > Switch Database to display the screen.
Figure 4-3 Network: Switch Database
The following table describes the labels in this screen.
Table 4-3 Network: Switch Database
LABEL DESCRIPTION
Switch Name This field displays a descriptive name for the switch.
MAC Address This field displays the MAC address of the switch.
23
To Next Page
Loading...
