Smart Ethernet Switch Series User’s Manual
Table 4-3 Network: Switch Database
LABEL DESCRIPTION
Authentication Key This field displays the security key for the RMT to access the switch for
management.
4.2.1. Adding a Switch
You can add a device in the Switch Database screen for management.
1. Click Network > Switch Database.
2. Right-click in the Managed Switches table and click Add.
3. A Set Switch Information screen displays. Configure this screen and click OK to insert a
new entry in the database. Refer to Table 4-2 for the field descriptions.
4.2.2. Editing Switch Information
Follow the steps below to modify the information of the selected switch.
1. Click Network > Switch Database.
2. Right-click on a switch entry in the Managed Switches table and click Edit.
3. A Set Switch Information screen displays. Make the changes and click OK.
4.2.3. Deleting a Switch
In the Switch Database screen, right-click on a switch and click Delete to remove the
selected switch from the database.
24
To Next Page
Loading...
