Smart Ethernet Switch Series User’s Manual
Right-click on the VLAN Table to create, modify or delete a VLAN.
You cannot delete or modify the default VLAN (with VLAN ID 01) to which all
ports belong.
Figure 6-13 Switch Configuration: VLAN Configuration: 802.1Q
The following table describes the labels in this screen.
Table 6-6 Switch Configuration: VLAN Configuration: 802.1Q
LABEL DESCRIPTION
Label Description
VLAN Table This list displays the VLANs and port members. Right-click to create, modify or
delete a VLAN.
VLAN No. This field displays the index number.
VLAN ID This field displays the number that identifies the VLAN.
Port Members This field displays the number of the port belonging to the VLAN.
Port VLAN
Mapping
Right-click on a port entry and click Set VLAN ID to specify the ID of the VLAN to
which the switch sends untagged packets received on this port.
This also sets the switch to add the selected VLAN ID information to outgoing
packets.
Output Port
PVID Insertion
Specify whether to add VLAN information to packets to a port.
Right-click on a port and click Enabled or Disabled.
42
To Next Page
Loading...
