Smart Ethernet Switch Series User’s Manual
Right-click on the VLAN Table to create, modify or delete a VLAN.
You cannot delete or modify the default VLAN (with VLAN ID 01) to which all
ports belong. Port members are eliminated from the default VLAN when you
add the ports to other VLANs.
Figure 6-9 Switch Configuration: VLAN Configuration: Port-Based
The following table describes the labels in this screen.
Table 6-5 Switch Configuration: VLAN Configuration: Port-based
LABEL DESCRIPTION
VLAN Table This list displays the VLANs and port members. Right-click to create, modify or
delete a VLAN.
VLAN No. This field displays the VLAN ID.
Port Members This field displays the number of the port belonging to the VLAN.
Creating a Port-based VLAN
You can create up to 32 VLANs on the switch.
Follow the steps below to add a new port-based VLAN.
1. Right-click on the VLAN Table in the Port-based VLAN Configuration screen and click
Add.
2. The following screen displays. A screen displays. Select the ports you intend to set in this
39
To Next Page
Loading...
