Smart Ethernet Switch Series User’s Manual
Table 5-1 Switch Status: Port Status
LABEL DESCRIPTION
This field displays whether this feature is activated on the port.
Loop Detected This field displays whether a network loop is detected on this port.
Trunk Fault This field displays whether this port is down in a trunk group.
Router Port This field displays whether this port is used for routing packets.
Refresh Click Refresh to update this screen.
5.2. MIB Information
Use the MIB Information screen to start collecting port statistics and see the amount of traffic
received or transmitted on the ports. Click Switch Status > MIB Information to display the
screen.
Right-click to change the counter unit.
Figure 5-2 Switch Status: MIB Information
The following table describes the labels in this screen.
Table 5-2 Switch Status: MIB Information
LABEL DESCRIPTION
Port This field displays the port number.
26
To Next Page
Loading...
